foundation system of burj al arab

MM30 High Pressure concrete pump for low slump repair materials

The MM30 High Pressure concrete pump is engineered for low slump repair materials. Its compact size and mobility make it the best choice for steel mills and confined spaces.

Use:

1. Perfect for Refractory,
2. Shotcrete,
3. Pressure Grouting,
4. Concrete Restoration,
5. Rock Scaping,
6.Flat Work & Bridge Repair

MM30HP is a pump which provide a material (concrete, shotcrete etc.) output of 4.5 cum/hr with a pressure on concrete 2085 psi. The aggregate size can be handled is 9.5 mm. More features are:
Material Cylinder Diameter (in/mm)
3.0/76
Material Cylinder Length (in/mm)
18/457
Material Outlet Diameter (in/mm)
3.0/76
Concrete Valve
Swing-Valve
Max Aggregate Size (in/mm)
.375/9.5
Diesel Engine Kubota Turbo (hp/kw)
42.5/32
Length (in/cm)
76/193
Width (in/cm)
29/74
Height (in/cm)
61/154
Weight (lbs/kg)
1640/744
Auxiliary Hydraulic Flow (gpm/ltr)
8/30
Auxiliary Hydraulic Pressure (psi/bar)
2500/172
Variable Displacement Piston Pump
Yes
Note: Capacity, conveying distance and height will vary depending on the job conditions, mix and diameter of pipeline used.

ADDITIONAL FEATURES - MM30HP
MM30 High Pressure concrete pump
MM30 High Pressure concrete pump 

-Electric Volume Control

-Chrome Material Cylinders

-Patented Lube Tube

-Hydraulic Drive Wheel

-Safety Emergency Stop

-Hydraulic Test Ports

-Hardened Steel for Longer Wear

-Remote Control Fwd/Rev with Cable

-Weatherproof Enclosure

-Steel Material Pistons

-Electric Engine Start

-Hour Meter / Tachometer

-Swing-Valve with Splined Shaft

-Hydraulic Oil Cooler

-Hydraulic Sight Gauge

-Oil Temp - Hydraulic

-Reversibility at Any Point in the Stroke

-Proximity Switches on Cylinders to
Eliminate Short Stroking

-Protective Cover

-Easy Access Grease Ports

-Suction Strainers

-Hydraulic Oil Filter

-Certified Parker Hoses

-Convenient Hopper Clean Out -Dual Hydraulic Circuits

No comments:

Post a Comment

Followers