EPOXY INJECTION: FLOOR SLAB REPAIR

Epoxy injection has been successfully used in the repair of cracks in buildings, bridges, dams, and other types of concrete structures. High strength epoxy adhesives are commonly used to seal, bond, and reestablish the strength and integrity of the distressed slab.

This method is typically used for cracks that are less than ¼" in width with no vertical offset. 

 EPOXY REPAIR PROCESS


The epoxy bonds the two sides of cracked slab together and the surface is ground smooth after the epoxy cures. This method is applicable for minor cracks in slab. 
 
EPOXY  INJECTION:  FLOOR SLAB  REPAIR

a.  The crack is cleaned and prepared for epoxy bonding
b.  Temporary injection ports are bonded to the slab directly over the crack.
c.  The crack is sealed on the surface with a temporary bonding agent
d.  The two part epoxy is mixed and pressurized into the crack with a high pressure injection    
     gun. The epoxy penetrates the full depth of the crack

e.  After curing of the epoxy, ports are stripped and slab is ground smooth.
EPOXY  INJECTION:  FLOOR SLAB  REPAIR
*****Sometimes steel reinforcement is utilized on slightly larger cracks with a vertical offset. This method is typically referred
EPOXY  INJECTION:  FLOOR SLAB  REPAIR

to as "slots", staples, or stitches, and is used to obtain a greater strength at those distressed areas.

3 comments:

  1. Howdy, great article. Thank you intended for giving your ideas, it is not simply interesting but additionally gives ones reader knowledge. Great sites design far too, Kind regards!

    ReplyDelete
  2. We are offering a service of new roofing and roofing repair services to commercial and residential clients in Florida state. To check the details visit here: Grace Roofing Enterprise

    ReplyDelete
  3. Howdy, great article. Thank you intended for giving your ideas, it is not simply interesting but additionally gives ones reader knowledge. Kind regards.
    Floor Coating Singapore

    ReplyDelete