Foundation, Concrete and Earthquake Engineering

Hammer Drills and Impact Drills and Their Differences

There are many differences in a lot of different power tools. Two tools that everybody loves are Hammer Drills and Impact Drills. These drills are used for different reasons. Both have there pros and cons in there usages. Hammer drills have more power to it as an impact drill will provide you with more torque.

People use these drills for all different reasons. Depending on the manufacture that your drill is from you are able to get a drill in all different sizes and speeds and torque. A lot of drills are no capable to be battery powered as opposed to plugging them into the outlets. There are a few different voltages. They range from 12 volt up to 120 volts. There are many brand names that you can choose form. The list starts with DeWalt, Hilti, Hitachi, Milwaukee, and Makiti. They all have there differences between each manufacture and the differences between hammer drills and impact drills are not so common to always see.



When using a Hammer Drill it is important that you use the one that will get your job done correctly. There are so many different reasons to use a hammer drill. Whether you are just drilling in to the wall or if you are drilling into the ground there is always a hammer drill that will fit your needs. Its important that when looking for a drill you take a look at your job requirements and see what type of job it will be.

A lot of drills are capable to provide you to use any size drill bits that will get you hole to the adequate size. There are safety precautions that you will need to know before you manually use these power tools. Authorized personal only.

impact drillNow as far as Impact Drills are concerned they have a lot of different qualities that will help you attack any type of job you are looking to pursue. From small to large you are able to use a variety of different brand name impact drills and drivers. People now use impact drills as there new screw driver. It's more convenient to use an impact drill/driver as opposed the the old school hand screw driver.

The reasoning there is that you are not straining your hand or wrist when tightening a screw. The impact drill provides an easier way for you to do what you need to do whether the job is on a construction job site or just simply tightening the loose screw to your toilet paper rack. It is very easy to use and that is why people are turning to power tools now a days because they are more equipped for the ordinary user and installer. Impact drills also are able to insert different drill bits and spade bits so that you can attack any drilling need that you need to have done.

1 comment:

Followers